All of our standard tube dimensions are listed in our technical data sheet. We also manufacture fully tailored hollow sections: outer dimensions, thicknesses and lengths can be custom-made to your requirements. Find information about our tailoring service, or use free design software Stalafit PRO to design your own hollow section. Our Sales is always happy to assist you, as well.

Tailoring is something we do on the daily. Besides outer dimensions, we can also adjust thicknesses, lengths and strengths based on your specific needs. Find information about our tailoring service, or use free design software Stalafit PRO to design your own hollow section. Our Sales is always happy to assist you, as well.

Yes. In addition to standard lengths, you can order cut-to-length to save material, transportation and assembly costs – as well as decrease waste and environmental footprint. Use the cut-to-length savings calculator to estimate your savings or contact Sales to ask for more information.

We currently manufacture welded components. Contact our Sales about the possibility for welded structures.

Yes, we do. Perforation, angle cutting and laser cutting are examples of our versatile tailoring services. You can read more about tailoring here or get in touch with our Sales here.

Unpolished (as welded) is a surface condition without additional surface treatments, meant for our Ferritic tubes, Imperial sized Austenitic tubes and bigger Austenitic and Duplex tubes (> 100x100x6 mm). Stalazzo is is a term we use for a surface condition that has been grinded with flap discs, available in dimension range 25x25x1,2 – 100x100x6. Brushed is similar to Stalazzo but used in our HF production lines where production speed is much faster compared to laser/TIG/plasma welding.

Our products are always manufactured within thickness tolerances specified in EN and /or ASTM standards.

Stalatube flat bars are currently available in steel grades AISI 304 (EN 1.4301), AISI 304L (EN 1.4307), AISI 316Ti (EN 1.4571) and AISI 316L (EN 1.4404) and in metric sizes. They are slit, straightened and edge rolled. Standard length is 4 meters and standard surface finish is hot rolled 1D. Other lengths and surface finishes are available by request. See our flat bar technical data sheet here.

We do not manufacture round tubes – our products are square and rectangular hollow sections and profiles.

All products we sell are manufactured to strict quality requirements and have passed a quality inspection. We do not supply factory second / downgrade products.

Stalafit is a term we use for our tailoring service. We provide various and versatile tailoring options to create fully custom-made hollow sections, profiles and components. See our tailoring service solutions here.

Stalafit PRO is a free-of-charge design software in which you can design and optimize your hollow sections and create a comprehensive design report. It produces ultimate limit state, serviceability limit state and fire design in accordance with Eurocodes. It has been created to help you choose the optimal product for a specific stainless steel application, starting from material selection supported by the EN1993-1-4 guidance. Use Stalafit PRO in your browser!